Tuesday 15 May 2012

Scary stuff.

The milliput I put round the hip is looking a bit dodgey but I think it'll hold for now. It's time to make some bones! yay!

I was going to use ordinary white sculpey but that whole 15 minutes per quarter inch thing was preying on my mind. Then I started worrying about the masking tape - what if it burns in the oven? Or what if the pva glue gives off poisonous fumes? Eek!! What if there's air trapped in the foil and the whole thing explodes and ruins my oven? Scary stuff...

In the end I think I found a safe option. Cover everything in a layer of Fimo - no 15 minutes per quarter inch here, just whack it in the oven at 130c for 25 minutes.

I started with the legs and feet, then moved on to the arms. Bugger! I realised that I'd have to decide on a pose for the hands if I was going to do this. Hmmmm...he looks like he would probably need a walking stick, not least because his head is going to weigh quite a bit, and his back and neck being curved as they are. So the basic hands needed to be bent to hold a stick or staff of some kind.

It was beginning to get a bit cumbersome to handle at this point. Then I remembered the little widgity, grippy thing that had belonged to my dad. He used to make model railways and had all kinds of tools and bits'n'pieces that I've inherited. That did the trick and as it's all metal I'll be able to use it in the oven too!! :)

On to the head. Two packets of Fimo later and he's all done ready for cooking. Feeling a bit chuffed that I even remembered to make eye holes through the clay so I can glue in the stems on the boot button glass eyes later on.







No comments:

Post a Comment